5. If the rear wheel hub equipped eccentric, first center the wheel, then tighten the adjusting nut

Home Technology Travel Family Kids Celebrating Home Repair Gardening Construction Construction singpost Purchasing Health Culinary Computer Games & Entertainment Other Useful Widgets Psychology Study Tips 7 songs that brought people from places
Often they are sold directly in the package. Therefore singpost there is a problem: singpost how to collect it? Well if you have experience, but if not? Here's to all those in need, we are willing to share information. So, how to assemble a bicycle.
1. The front fork should compress bike brake frame and release the brake cable through the slot provided on the brake frame (otherwise the brake pads will stir insert the front wheel). See. Fig. 1 for kantelivernoy singpost brake system and Fig. 2 for v-brake.
3. Insert the front wheel into a cut cock plug. It is important. For pictures of tires on the front and rear wheels were sent to one side. If it does not turn the front wheel so that both wheels of pictures overlap. In some cases, the direction of rotation of the wheel can be specified on the lid.
4. Tighten the fastening screws front wheel wrench. If equipped eccentric wheel, first hand tighten adjusting nut. While the eccentric lever is in the horizontal position, and then turn the eccentric lever 90 degrees (see. Fig. 4).
2. Temporarily fix it with the bolt located on the frame using spanners. If the bolt is designed as eccentric, it must first tighten the adjusting nut while the eccentric lever is in the horizontal position. Then turn the eccentric lever up to 90 degrees. Pedal
2. If it is not, then the rear fork of bicycle frame and squeeze the brake release brake cable through the slot. Available in the brake frame (otherwise the brake pads interfere center wheel). See. Fig. 9 for kantelivernoy system and Fig. 10 for vibryeyechnoy.
4. Put on the wheel center and alternately tighten the screws fastening the wheel wrench. It is important to tighten the nuts alternately, the best half-cycle, it will save you from the rear wheel bias and provide more accurate alignment.
5. If the rear wheel hub equipped eccentric, first center the wheel, then tighten the adjusting nut to the extension, while the eccentric lever is in the horizontal position. Then simply turn the lever up to 90 degrees.
1. Remove singpost pylezaschytnuyu cover (Fig. 11)
2. Move the scroll wheel and pedals a few revolutions, and the chain will go on a little star system.
Figure 30.
It is important to understand the principle of the brake system of the bike. Wrong setting and adjusting the brake system can lead to loss of control. On bicycles can be set different types of braking systems: kantilovernaya, vibryeyechnaya, disk. Kantilovernaya and vibryeyechnaya systems differ in appearance, performance actions along the length of the brake framework, but have the same principle. singpost When you press the brake handle on the handlebars, brake cable is shifting towards the top and pulls each other brake frame with attached brake pads on them, and they, in turn, grip the wheel rim. This wheel stops spinning and the bike continues its movement by inertia with friction emerged between the tire and the ground stops the bike. When you release the brake handle, the cable goes down with engaging equalizer by brake springs installed inside frames, according released brake pads and the wheel rim can then rotate freely. Disc brakes have significant differences. Below is given a detailed description kantelovernoy settings, singpost vibryeyechnoy system and disk brakes. Before setting, you must determine the appearance that you have brake system and follow it to the appropriate locations.
7. Do the same with a pair of brakes remaining.
9. Some systems are equipped kantelovernyye bolt, which can adjust the force of the tension spring brake installed inside the frame and consequently symmetry brake framework. Adjust the brake if necessary as shown in Fig. 39
11. If you press the brake handles, singpost steering concerns, you need to pull the brake cable. To do this, loosen the cable clamp bolt, which is located at the top of the brake frame pliers to pull the rope back and fix it as much as possible to 5mm hex wrench or 10mm wrench.
13. In order to reduce the distance singpost between the brake pads and the rim should unscrew counterclockwise the adjuster bolt to the desired length and secure it with a lock nut.
14. In order to increase the distance between the brake pads and the rim should ukrutyty clockwise the adjusting screw to the desired length and secure it with a lock nut. Vibryeyechnaya brake system